During the process of using Panasonic refrigerators, you have encountered some errors many times but do not know how to fix them effectively. Through the article shared below, Hoang Ha Mobile summarizes for readers common errors and how to fix Panasonic refrigerators quickly and simply at home.
The freezer or cooler compartment is not cooling
When using a Panasonic refrigerator, you may encounter a situation where the freezer or cooling compartment does not function. This can lead to food inside the refrigerator spoiling quickly or making it difficult to freeze.
Bạn đang xem: Hướng Dẫn Sửa Tủ Lạnh Panasonic Tại Nhà – Những Lỗi Thường Gặp
The cause of this problem can stem from simple factors such as the plug not being plugged in properly, leading to the refrigerator not receiving enough power to operate. Besides, improper temperature adjustment can also cause the refrigerator or freezer to not be as effective as desired.
In addition, the location of the refrigerator also plays an important role. If the refrigerator is placed in a place exposed to direct sunlight or too close to a wall, cooling performance may be reduced.
To repair a Panasonic refrigerator when encountering this situation, users need to carefully check the plug and ensure the power source is stable. At the same time, it is necessary to adjust the temperature according to the manufacturer’s instructions for use. Choosing a cool location to place the refrigerator, away from sunlight and away from the wall also contributes to improving the device’s operating efficiency. Note, before checking or repairing the refrigerator, users need to ensure safety by disconnecting the power source.
Frozen or wilted food
A common problem when using Panasonic refrigerators is frozen or wilted food. Vegetables and fruits lose water, become wrinkled, frozen meat and fish lose their freshness, affecting meal quality and causing food waste. The main cause often comes from inappropriate temperature settings or cold air flow that is not evenly distributed inside the cabinet.
Many users have the habit of setting the refrigerator temperature to the lowest level with the hope that food will be preserved better. However, this can easily lead to freezing, especially with vegetables and fruits that are sensitive to temperature. In addition, improper installation of compartments also causes cold air to not circulate effectively, creating “hot spots” and “cold spots” inside the refrigerator.
To fix a Panasonic refrigerator when encountering this situation, you can try some of the following methods:
- Temperature adjustment: Make sure the refrigerator temperature is set at the appropriate level for each type of food. You should refer to the user manual to know the ideal temperature for each compartment.
- Installing storage compartments: It is necessary to install drawers and shelves in the correct position and ensure they are not blocked by food, allowing cold air to circulate easily.
- Arrange food: Do not arrange food too tightly, create space for cold air to circulate evenly throughout the refrigerator.
The refrigerator works but its cooling ability is weak
One of the main causes of this situation is that the refrigerator has to operate continuously and its cooling ability is reduced because the layer of snow inside has accumulated too thickly. Therefore, the heat transfer and cooling capacity of the cabinet is reduced. In addition, there are also a number of other causes leading to this situation such as:
- The refrigerator’s upper gasket is bent or bent, leading to cold air leaking into the outside environment, causing the refrigerator to have to work to maintain the appropriate temperature.
- Missing or excess refrigerant gas leads to instability during the cooling process.
- The cooling system contains a lot of water vapor due to problems with the vacuum process, leading to blockages in the capillaries and reduced cooling performance.
- The refrigerator contains too many items, exceeding the specified volume, causing the cooling system to overload and not cool evenly.
To repair a Panasonic refrigerator when the cooling system has problems, users need to clearly determine the cause and take appropriate measures. Periodically defrosting, replacing door gaskets when necessary, checking and adding refrigerant gas, handling the refrigeration system containing water vapor, as well as properly arranging food in the refrigerator are effective solutions to help the refrigerator The refrigerator operates stably and saves energy.
The refrigerator makes a lot of noise
The main reason why Panasonic refrigerators make a lot of noise is due to improper placement of the refrigerator. If you place the Panasonic refrigerator in a place with many rough and unstable places, it will create noise due to vibration during operation. In addition, system components such as fans or compressors in the refrigerator can be damaged after long periods of use.
Therefore, to fix and repair a Panasonic refrigerator when it makes noise, you need to ensure the location of the refrigerator has a flat, smooth and solid surface. If after placing the cabinet it still makes noise, you can use hinges to prevent vibration right at the foot of the cabinet. In case the noise still does not decrease, you should call a technician to repair and check the components in the refrigerator.
The light bulb in the Panasonic refrigerator does not light up
One of the common problems with Panasonic refrigerators is that the light inside does not light up, causing inconvenience when picking up items in low light conditions. There are some common causes leading to this condition such as:
Burned light bulb: This is the simplest and easiest cause to fix. The life of a light bulb is limited, after a period of use, the light bulb may burn out and need to be replaced.
Broken light switch: Light switches are usually designed to automatically turn on when the cabinet door is opened and off when the door is closed. If the switch is stuck, broken or loose, the light will not turn on.
Improper electrical connection: Electrical line problems can also cause the refrigerator light to not work.
To fix a Panasonic refrigerator when the light bulb does not light up, you can do the following steps:
- Replace the light bulb: First, check to see if the light bulb is burned out. If the bulb is burned out, you need to replace it with a new bulb of the same type and wattage as the old bulb.
- Test the light switch: Next, check to see if the light switch is working properly. You can try pressing the switch a few times to see if the light turns on/off accordingly. If the switch is broken, you need to replace it with a new one.
- Check the electrical connection: Finally, check the electrical wire connecting from the power source to the refrigerator light. Make sure the power cord is not broken, loose or bitten by mice. If a problem is detected, you will need to repair or replace the power cord.
A bad smell appears inside the Panasonic refrigerator
If you notice a bad smell appearing in the refrigerator while you are using it, it may be because the food is spoiled or not tightly sealed when stored. In addition, the water in the tray at the back of the refrigerator is contaminated with bacteria, leading to bad odors in the refrigerator. Therefore, you need to follow some of the steps below to fix and repair your Panasonic refrigerator when you encounter bad odors in the refrigerator such as:
- Check all the food in the refrigerator and rearrange any food that is expired or spoiled.
- Make sure when storing food that it is always sealed or placed in a box to prevent odors from spreading.
- Clean the entire water tank behind the cabinet thoroughly to remove odors.
- Use odor-proof boxes to absorb unwanted odors.
The water tray behind the Panasonic refrigerator is overflowing
The water tray behind the Panasonic refrigerator is used to catch condensation from the condenser during the cooling process. However, sometimes this tray overflows with water, causing inconvenience and unsanitary conditions. Here are some causes and ways to fix this situation:
Cracked/punctured water tray: Due to impact or long-term use, the water tray may be cracked or punctured, causing water to leak out.
Clogged/loose drainage pipe: Garbage, dust or dirt that has accumulated over time can clog the drainage pipe, preventing water from flowing down to the tray. In addition, a loose drain pipe also causes water to flow out.
Faulty temperature sensor: A faulty temperature sensor causes the refrigerator to operate continuously, making ice non-stop.
Xem thêm : Hướng dẫn cách chụp màn hình iPhone 13 dễ hiểu nhất
Improper installation of the refrigerator: A refrigerator that is tilted or placed on an uneven surface can also cause water in the tray to overflow.
To fix a Panasonic refrigerator when the water tray behind the refrigerator is overflowing, you can try some of the following methods:
- Check the water tray: If the tray is cracked/punctured, you need to replace it with a new one.
- Check and clean the drainage pipe: Remove the drainage pipe and check to see if it is clogged. If so, clean it thoroughly with water or a unclogging tool.
- Check the temperature sensor: If you suspect the temperature sensor is defective, contact the Panasonic warranty center for inspection and repair.
Panasonic refrigerator cools slowly or does not freeze
One of the errors that you often have to repair with Panasonic refrigerators during use is the ability to cool slowly or not freeze. The main cause of this problem is that the cold air duct is clogged with dirt or ice. Therefore, the ability to convey air throughout the entire cabinet space is reduced.
In addition, if the defrost unit is damaged, ice will accumulate in the evaporation area, leading to reduced cooling performance. Or when refrigerant gas leaks into the outside environment, it also leads to a situation where the Panasonic refrigerator does not cool or cool effectively.
To overcome this situation, you should regularly clean and sanitize the cold air duct equipment so that it is not clogged. Besides, you should regularly check to see if the defrost is working properly. In case, refrigerant gas leaks, you should call a technical staff to assist in checking and promptly remedy this situation.
Panasonic refrigerator has an electrical leak
An electric leak in a Panasonic refrigerator is a dangerous incident that can cause electric shock to the user and damage other electrical equipment. Below are some causes leading to this condition:
- Broken wires, open circuits, rat bites or worn insulation are common causes.
- A loose, damp or damaged electrical outlet can also cause electrical leakage.
- A damaged refrigerator (compressor) block, overload or short circuit can also lead to electrical leakage.
- Improper installation of components inside the refrigerator, especially after repair or maintenance, can cause electrical leakage.
- Many families do not install a ground wire for the refrigerator. When there is a leak, the electric current has no safe way to escape to the ground, causing danger to users.
To repair a Panasonic refrigerator when there is an electrical leak, you just need to do the following:
- Regularly check the power cord, outlet and plug for signs of damage.
- Make sure the refrigerator is properly grounded. The ground wire will conduct leakage current to ground, preventing the risk of electric shock.
- Use a standard electrical outlet, ensuring good contact and moisture resistance.
- If you are not technically savvy, you should contact a professional repairman to check and fix the electrical leak problem.
Panasonic refrigerator has frost and ice inside
When the insulation sheet between the outside environment and the inside of the refrigerator is exposed, it is one of the main causes leading to this situation. This allows cold air to escape and form snow. Besides, if the evaporator in the refrigerator is not working properly, it can easily cause dew and ice accumulation. Here are some ways you can do it easily and simply to fix your Panasonic refrigerator when it’s condensed and frozen:
- Check and evaluate whether the insulation panel between the outside environment and the inside of the refrigerator is leaking. If the insulation panel is damaged, you should replace it.
- Check that the evaporator is operating properly. In case of necessity, you can also replace or repair a new device to ensure the refrigerator works well.
- Make sure the refrigerator temperature is at the appropriate level and does not need to be too cold.
- Limit opening the refrigerator door frequently to reduce the penetration of outside air into the refrigerator.
Summary
Through the above article, you have learned the cases where Panasonic refrigerators need to be repaired as well as the causes. However, to ensure safety, you should call a technician to repair in case it cannot be fixed.
See more:
Nguồn: https://tuyengiaothudo.vn
Danh mục: Thủ thuật
